Download the preamp spec sheet:- Preamps for magnetic speed transducers and RF speed transducers
- Gives speed transducers a greater range due to a stronger and more noise-free output signal
- Intrinsically Safe to Zone 0 pulse amplifiers, frequency to current or voltage converters,
- Fills requirements needing remotely mounting preamps away from the transducer - shielding the electronics from any transducer's harsh temperature environment
- Digital output format is easily read by computers and process controllers.
- Preamps ready for CE markets
Our families of magnetic speed transducer preamps or RF transducer preamps come ready for use in-line with MS connectors, in Y1 enclosures or for custom applications.
Our frequency to current and frequency to voltage signal conditioners for passive and active magnetic switches and RF speed transducers fit in a variety of conduit-mount enclosures. These preamps change the transducer output to a linear current or voltage output respectively. 4-20mA and 10-50mA signal converters have many applications in the flow industry. Frequency to voltage converters provide either a 0-5 V (TTL) or 0-10 V output.
Our Opto-isolated preamp is for situations that need circuitry keeps noise on the input signal from passing through to the signal output.
Our single and multiple output pulse amplifiers improve and stabilize weak signals from variable reluctance speed transducers.
Other signal conditioners include:
- Directional speed transducer preamps for use with two magnetic speed transducers, and
- Flow switch for magnetic speed transducers.