Explosion-proof Enclosures
Powder coated, copper-free capped elbows applicable for Class I, Division 1 & 2, Groups C, D; Class II, Division 1 & 2, Groups E, F, G; Class III areas. These enclosures are UL approved, CSA and FM certified. The smooth integral bushings prevent damage to wires.
PART NUMBER | ITEM |
90010-001 | Killark Y1 enclosure for the Models 4013 and 4023 signal conditioners. |
90010-003 | Killark Y3 enclosure for Model 4016 and 4026 frequency to voltage or frequency to current converters. Openings are 1” NPT. 1” to ½” NPT reducers also available. |
90012-001 | Appleton ELBY 50 enclosure for the 4027 FTC and 4028 FTV converters. |
90012-002 | Appleton ELBY 75 enclosure |
900120-03 | Appleton ELBY 100 enclosure |
Connectors
Mil spec connectors for use with its passive and active magnetic and RF speed transducers. Cable assemblies made to order.
PART NUMBER: | CONNECTOR DESCRIPTION: | MATES WITH: |
2 Pin: | ||
3000-XX2 | MS3102-10SL-4P | MS3106-10SL-4P |
3001-XX2 | Bendix, Bayonet MS-3116-F8-2S | MS3113-H8A-2P |
3004-XXXX | Micro C, straight or right angle | IEC IP 68 or NEMA 6 watertight connectors |
3 Pin | ||
3000-XX3 | MS3102A-10SL-3P | MS3106-10SL-3S |
3004-XXXX | Micro C, straight or right angle | IEC IP 68 or NEMA 6 watertight connectors |
4 Pin | ||
3000-XX4 | MS3102A-12SL-844P | MS3106 |
3001-XX4 | Bendix, Bayonet MS-3116-F8-4S | MS3113-H8A-4P |
5 & 6 Pin | ||
3004-XXXX | Micro C 5 or 6 pin, straight or right angle | IEC IP 68 or NEMA 6 watertight connectors |
3001-XX6 | Bendix, Bayonet MS-3116-F10-63 | MS3111-H10A-6P |
Jam Nuts
Stainless steel jam nuts for threaded magnetic and RF speed transducer and zero speed switch.
PART NUMBER: | JAMNUT DESCRIPTION: |
10038-004 | ¼ - 28 UNF-2B |
10038-009 | 5/8 - 18 UNF-2B |
10038-013 | 11/16-24 UNEF-2B |
10038-015 | ¾ - 16 UNF-2B |